柴油低温临界吸收法回收装车挥发油气

研究了采用柴油低温临界吸收法回收装车挥发油气的效果。实验结果表明：按装车挥发油气中的总烃体积分数为20.88%、装车挥发油气流量为280 m³/h、年运行时间为2 668 h计，装置年回收油气量为291 t，装置年最大运行功率为206.770 MW，装置投资回收期为3 a;处理后净化气中的总烃体积分数为1.24%，排放质量浓度低于25 g/m³，油气回收率达95%。处理后净化气满足GB 20950—2007《储油库大气污染物排放标准》，取得了较好的环保效益和经济效益。     

柴油机冷起动辅助措施的匹配优化试验研究

重点论述了柴油机冷启动辅助装置燃油加热器的选型试验。对燃油加热器优劣的评价指标进行了分析研究,提出了燃油加热器的评价方法。最后通过样本CFD分析,优化了燃油加热器与发动机之间水路系统的匹配,实际效果进行了试验验证。     

作业机废气减排技术研究

柴油发动机尾气排放中含有比汽油发动机更多的颗粒污染物。文章叙述了尾气净化装置反应原理,触媒及化学稳定性,柴油氧化催化剂和颗粒催化过滤器优点。通过外部加装尾气净化装置,解决了尾气污染问题,具有较好的发展前景、较强的实用性和可操作性。     

不同CDPF贵金属负载量对柴油公交车VOCs组分排放影响

基于重型底盘测功机,利用质子转移反应质谱(PTR-MS)研究了柴油公交车在中国典型城市公交车循环(CCBC)下,不同CDPF贵金属负载量对尾气中挥发性有机物(VOCs)组分排放特性的影响.结果表明,柴油公交车VOCs主要组分为含氧有机物(OVOCs)、芳香烃和烯烃等,且OVOCs占比达50%以上;在贵金属成分、配比相同时,VOCs减排率随CDPF贵金属负载量增加而增加:贵金属负载量为15 g·ft~(-3)(A型后处理装置)、25 g·ft~(-3)(B型)和35 g·ft~(-3)(C型)时,VOCs总量的减排率依次为36.2%、40.1%和41.4%.C型后处理装置对烷烃全循环减排率高达70.2%,且对OVOCs的催化有微弱优势;对于不饱和烃类,3种不同贵金属负载量的后处理装置均有一定催化效果,但无明显差异;A型对含氮有机物减排率可达50.5%,但减排率随贵金属负载量增加而降低.采用DOC+CDPF后能较好地降低公交车VOCs排放量进而降低臭氧生成潜势(OFP).同时考虑不同方案减排效果与成本因素,当加权系数分别为0.8和0.2时,B型为最优方案.     

北京市典型餐饮企业油烟中醛酮类化合物污染特征

醛酮类化合物作为餐饮油烟的组成物质之一,是挥发性有机物(volatile organic compounds,VOCs)中化学反应活性较强的一类物质.但目前国内还没有针对餐饮源醛酮类化合物的排放特征进行较为系统的研究.为进一步明确餐饮源醛酮类化合物排放水平和控制现状,获取城市群餐饮源VOCs排放控制决策依据,本研究选取北京市8家不同类型的餐饮企业,采用涂布2,4-二硝基苯肼(DNPH)的硅胶采样管进行油烟样品采集,用超高效液相色谱(UPLC)对油烟样品中的醛酮类化合物进行测定.结果表明按基准风量折算后,8家餐饮企业排放的油烟中醛酮类化合物浓度高低依次是:烤鸭中式烧烤家常菜西式快餐学校食堂中式快餐川菜淮扬菜.餐饮企业油烟中醛酮类化合物(C1~C9)浓度水平范围为115.47~1 035.99μg·m-3.不同类型餐饮企业油烟中醛酮类化合物组分构成存在较为明显的差异,中式餐饮企业醛酮类化合物C1~C3物质所占比例均在40%以上.快餐类餐饮企业醛酮类化合物C4~C9所占比例明显高于其他类型餐饮企业.从醛酮类化合物控制现状来看,北京市目前主流高压静电式油烟净化器对醛酮类化合物的去除效果十分有限.     

Effect of lubricant sulfur on the morphology and elemental composition of diesel exhaust particles

This work investigates the effects of lubricant sulfur contents on the morphology, nanostructure, size distribution and elemental composition of diesel exhaust particle on a light-duty diesel engine. Three kinds of lubricant (LS-oil, MS-oil and HS-oil, all of which have different sulfur contents: 0.182%, 0.583% and 1.06%, respectively) were used in this study. The morphologies and nanostructures of exhaust particles were analyzed using high-resolution transmission electron microscopy (TEM). Size distributions of primary particles were determined through advanced image-processing software. Elemental compositions of exhaust particles were obtained through X-ray energy dispersive spectroscopy (EDS). Results show that as lubricant sulfur contents increase, the macroscopic structure of diesel exhaust particles turn from chain-like to a more complex agglomerate. The inner cores of the core-shell structure belonging to these primary particles change little; the shell thickness decreases, and the spacing of carbon layer gradually descends, and amorphous materials that attached onto outer carbon layer of primary particles increase. Size distributions of primary particles present a unimodal and normal distribution, and higher sulfur contents lead to larger size primary particles. The sulfur content in lubricants directly affects the chemical composition in the particles. The content of C (carbon) decreases as sulfur increases in the lubricants, while the contents of O (oxygen), S (sulfur) and trace elements (including S, Si (silicon), Fe (ferrum), P (phosphorus), Ca (calcium), Zn (zinc), Mg (magnesium), Cl (chlorine) and Ni (nickel)) all increase in particles.     

青藏高原土壤柴油降解菌的筛选及降解实验研究

青藏高原北麓河地区土壤为典型的低温土壤环境,夏季高温季节表层土壤(5 cm处)温度仅为9℃,中层(20 cm处)为7.5℃,而40 cm处仅为4℃左右。土壤高温季节为7月中旬至9月上旬,而10月至来年6月土壤日平均温度下降为0℃以下。针对青藏高原低温土壤环境,在北麓河试验现场进行人工模拟柴油污染,16个月后采集污染土样,进行土著低温菌的复合筛选,柴油菌的筛选驯化温度为10℃。经过4次转接复合培养驯化后,菌液中微生物数量可达2.7×1012CFU/mL。筛选后的柴油降解菌90%以上为杆状菌,长度为2~3μm,少见球菌,其直径约为0.5μm。通过柴油摇瓶模拟降解实验,17 d后柴油去除率可达到62%。研究为青藏高原低温条件下的土壤柴油污染土著微生物修复提供了研究基础。     

柴油机增压系统变海拔自适应技术研究现状与发展趋势

分析了高原环境条件下柴油机功率下降、油耗增加、增压器效率下降、涡轮超温超速等问题,考虑采用自适应增压系统改进柴油机和增压器高原运行存在的问题。介绍了可变截面涡轮增压系统(VGT)、普通二级可调增压系统(TST)、复合增压系统(C2T)、基于VGT二级可调增压系统(R~2T)几种典型的可调增压系统的结构原理和高原应用现状。最后,结合柴油机变海拔和变工况的运行特点,从增压系统结构布置、智能优化算法、控制理论、多系统协同控制和增压器内部流场优化控制五个方面提出了增压系统高海拔自适应技术的发展趋势。     

BTEX pollution caused by motorcycles in the megacity of HoChiMinh

Monitoring of benzene, toluene and xylenes (BTEX) was conducted along with traffic counts at 17 roadside sites in urban areas of HoChiMinh. Toluene was the most abundant substance, followed by p,m-xylenes, benzene, o-xylene and ethylbenzene. The maximum observed hour-average benzene concentration was 254 μg/m3 . Motorcycles contributed to 91% of the traffic fleet. High correlations among BTEX species, between BTEX concentrations and the volume of on-road motorcycles, and between inter-species ratios in air and in gasoline indicate the motorcycle-exhaust origin of BTEX species. Daily concentrations of benzene, toluene, ethylbenzene, p,m-xylenes and o-xylene were 56, 121, 21, 64 and 23 μg/m 3 , respectively. p,m-xylenes possess the highest ozone formation potential among the BTEX family.     

浅议轮胎企业有机废气排放因子

介绍了AP-42、GB27632—2011中轮胎企业有机废气污染物情况,并与轮胎企业有机废气污染物实测数据进行比较分析,探讨了有机废气的排放因子。结果表明轮胎企业有机废气主要来自于炼胶、硫化工序,排放主要污染物为颗粒物、二甲苯、非甲烷总烃和二硫化碳,排放因子可参照AP-42确定。